Production of wires
Production process involves all operations which guarantee optimum quality of wire products:
- The preparation of appropriate raw material (cast or extruded wire) and cold drawing
- Fine combinations of heat treatment and cold drawing for various mechanical properties. We devote special attention to the production of thin wires, rivets, high-quality welding wire and rods, metalizing wire and brazing filler rod.
- These materials are delivered in carefully designed packages, coiled on plastic spools or adapted to each welding method.
Welding rods are produced with the process of scalping, which guarantees a clean, bright wire and high-quality weld.
Shape and dimensions
| Form | Range |
|---|---|
| Round wires | diameter 0.25 to 10 mm |
| Round rods | diameter 1.5 to 7 mm, length 350 to 4000 mm |
| Welding wires | diameter 0.8 to 3.20 mm, on plastic spools for the MIG process |
| Welding rods | diameter 1.5 to 5.00 mm, length 1000 mm, in tubes or boxes of 2.27, 5 and 10 kg and bundles of 10 or 25 kg |
Wire netting for fences and barbed wire
| Wire diameter | 2,00; 2,20; 2,50; 2,80; 3,10; 3,40 mm |
|---|---|
| Mesh size | 30×30; 45×45 (tennis courts); 50×50; 60×60; 80×80 mm |
| Height | 500–3000 mm |
| Length | 25 m |
| Barbed wire | 300 m coil (12 kg) |
| Barb spacing | 70, 100, 125, 150 mm |
Norms and specifications
Our products conform to various standards for chemical composition, mechanical properties, dimensional tolerances and surface condition. In addition to EN, DIN, ASTM, AWS, BS, UNI we can produce wire according to customers’ specifications and needs.
Wire alloys
Quality policy
We produce high-quality aluminium products and its alloys by using advanced technologies. We offer high-quality service and are constantly striving to reduce the environmental impacts of our current and past performance. With the introduction and implementation of continuous process improvements, we aim to achieve long-term customer satisfaction and loyalty, a high level of health and safety, and the commitment of employees.
Commitments
- To constantly improve quality management systems.
- To listen and respond to the needs, expectations, ideas and initiatives of all stakeholders, especially customers, employees and the public.
- To identify and manage risks that could threaten the company’s operations in all areas.
- To continually reduce the environmental impact resulting from current and past performance.
- To focus employee management on building commitment and preventing injuries and damage to health.
Slovenska Bistrica, 12 Jan 2018 · General manager: Mirko Stegne
